In the actual production process, we will find that the same small CNC lathes are operated by different people. The production efficiency varies greatly during the same working time. The processing capacity of many small CNC lathes is not fully reflected. Good effect. In the process of use, only by fully considering all factors affecting the production efficiency of small CNC lathes, and trying to improve the production efficiency of small CNC lathes, the production capacity of small CNC lathes can be fully utilized.

       In order to improve the production efficiency of small CNC lathes, we must first carefully analyze the parts processed by small CNC lathes, and clarify the technical requirements of materials, structural characteristics and shape tolerance requirements, roughness and heat treatment. Then, based on this, choose a reasonable milling process and a simple processing route.

       Usually, a part can have several different processes. The process of the parts is different. The production efficiency, processing cost and machining accuracy often have significant differences. Therefore, we should ensure the quality of the parts and, according to the specific conditions of production, Try to improve production efficiency and reduce production costs, and develop a reasonable processing technology.

       When machining a workpiece on a small CNC lathe of a CNC lathe custom manufacturer, the positioning and installation stress of the workpiece should be unified so that the design basis, the process reference and the programming calculation are unified; the number of clamping times is minimized, and the positioning is performed as soon as possible after one positioning and clamping. All surfaces to be processed; avoid using the manual adjustment processing scheme to fully utilize the performance of small CNC lathes.

       The cutting amount includes: spindle speed, depth of cut, and feed rate. When selecting the amount of cutting, if it is roughing, it is generally to improve productivity, but also consider economical and processing costs, you can choose a larger depth of cut and feed rate; if semi-finishing and finishing, it should be Under the premise of ensuring the processing quality, the efficiency, economy and processing cost are taken into account; the tool should be set to the highest possible feed rate when doing the lost motion. The specific values should be based on the lathe manual, the cutting amount manual, and the experience.